feat(v2): T-308C editable settings form (camera + params) applied on start

Settings tab is now an editable, scrollable form: camera connection (host/port/channel/user/masked password/transport/timeout/low-latency) and common detection params, each with a save button that writes the untracked local config. cmd/silver-pose pre-fills from the local file, passes the config path, and the controller reloads config on each Start so saved edits apply next run. UI cross-compiles for Windows. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-23 21:30:23 +08:00
parent 38b0013355
commit 03d3f83f1d
3 changed files with 321 additions and 31 deletions
@@ -612,3 +612,13 @@
 - T-308 落 DOING：分三段——A 界面四项（80%窗口/2×3画廊/Esc关弹窗/按钮灰显）、B V2 配置支持结构化摄像头（账号密码，百分号编码，仅未跟踪本地配置）、C Gio 可编辑设置表单（摄像头+常用参数，保存下次启动生效）。用户明确要求内网演示要账号密码框；合规做法=凭证仅入未跟踪 config.local.json，公开示例禁凭证、凭证不进 config_version/日志/事件（V2 已脱敏 ffmpeg 日志、版本已排除 URL）。顺带解决手动 %40 编码痛点。
 - 验证：每段 `GOOS=windows CGO_ENABLED=0 go build -mod=vendor` 交叉编译；配置层本地 go test；窗口目视需 Windows。
 - 下一步：先做 A。
+
+## 【2026-07-23】T-308 A/B/C 代码完成（交叉编译验证）
+
+- 状态：DOING（三段代码完成 + Windows 交叉编译/本地 go test 通过；窗口目视需 Windows）
+- A（界面四项）：80% 屏幕开窗（GetSystemMetrics）、画廊 2×3 且右栏缩小、Esc 关全图弹窗（key focus+filter）、开始/停止按运行状态灰显禁用（gtx.Disabled；硬失败 ReportIssue 复位 running）。`GOOS=windows` 交叉编译通过。
+- B（V2 结构化摄像头）：`config` 接受 host/port/channel/username/password（仅本地）或 rtsp_url_env，`net/url` 自动百分号编码（修掉手动 %40）；新增 `WriteLocalCameraSource`/`WriteLocalEventTuning`；护栏保留（拒绝整段 url/rtsp_url、凭证不进 config_version、公开示例无凭证测试）。本地 `go test ./internal/config` 通过。
+- C（Gio 可编辑设置表单）：设置页改为可编辑——摄像头(host/端口/通道/账号/密码掩码/传输/超时/低延迟)与常用参数(关键点/确认窗/水平角/模型置信度/快速下移/膝踝)，两个保存按钮写回本地配置；`cmd/silver-pose` 预填(读本地文件)、传 ConfigPath，控制器在每次开始监控时 `config.Load` 重载使保存生效。UI 交叉编译通过、gofmt 干净。
+- 阻塞：`cmd/silver-pose` 全量构建需 Windows+CGo(onnxruntime)+Gio；窗口目视/表单交互需 Windows。
+- 决策：账号密码按用户要求进设置(内网演示)，但仅存未跟踪 config.local.json、UI 掩码、不入日志/版本/事件；source.id 用固定/原值避免把内网 IP 写进 JSONL。设置改动"下次开始监控生效"经控制器重载 config 实现（对齐 V1 草稿→运行快照语义）。
+- 下一步：用户 Windows `go run ./cmd/silver-pose` 目视——80% 窗口、2×3 画廊、Esc 关图、按钮灰显、设置页可编辑并保存后重启监控生效。
@@ -3,6 +3,7 @@ package main
 import (
 	"context"
 	"crypto/sha256"
+	"encoding/json"
 	"flag"
 	"fmt"
 	"io"
@@ -32,8 +33,8 @@ func main() {
 	if err := validateStartup(cfg); err != nil {
 		log.Fatal("启动预检失败：", err)
 	}
-	controller := &controller{config: cfg}
-	window, err := ui.NewWindow(settingsFor(cfg), ui.Commands{Start: controller.Start, Stop: controller.Stop})
+	controller := &controller{config: cfg, configPath: *configPath}
+	window, err := ui.NewWindow(settingsFor(cfg, *configPath), ui.Commands{Start: controller.Start, Stop: controller.Stop})
 	if err != nil {
 		log.Fatal("创建操作窗口失败：", err)
 	}
@@ -44,6 +45,7 @@ func main() {

 type controller struct {
 	config     config.Config
+	configPath string
 	window     *ui.Window
 	mu         sync.Mutex
 	cancel     func()
@@ -83,22 +85,27 @@ func (controller *controller) run(ctx context.Context, cancel func(), runID uint
 		controller.mu.Unlock()
 		cancel()
 	}()
-	runtime, err := spike.OpenRuntime(controller.config.Model.ONNXPath, controller.config.Model.ONNXRuntimeDLLPath)
+	cfg, err := config.Load(controller.configPath)
+	if err != nil {
+		controller.window.ReportIssue("配置无效，无法开始监控")
+		return
+	}
+	runtime, err := spike.OpenRuntime(cfg.Model.ONNXPath, cfg.Model.ONNXRuntimeDLLPath)
 	if err != nil {
 		log.Printf("初始化 ONNX Runtime 失败：%v", err)
 		controller.window.ReportIssue("无法初始化 ONNX Runtime")
 		return
 	}
 	engine, err := fall.NewEngine(fall.EngineConfig{
-		KeypointConfidenceThreshold:     controller.config.Event.KeypointConfidenceThreshold,
-		SuspectWindowSeconds:            controller.config.Event.SuspectWindowSeconds,
-		ConfirmWindowSeconds:            controller.config.Event.ConfirmWindowSeconds,
-		RecoveryWindowSeconds:           controller.config.Event.RecoveryWindowSeconds,
-		CooldownSeconds:                 controller.config.Event.CooldownSeconds,
-		RequireRapidDrop:                controller.config.Event.RequireRapidDrop,
-		RequireLowerBody:                controller.config.Event.RequireLowerBody,
-		HorizontalAngleThresholdDegrees: controller.config.Event.HorizontalAngleThresholdDegrees,
-		ConfigVersion:                   controller.config.RuntimeConfigVersion,
+		KeypointConfidenceThreshold:     cfg.Event.KeypointConfidenceThreshold,
+		SuspectWindowSeconds:            cfg.Event.SuspectWindowSeconds,
+		ConfirmWindowSeconds:            cfg.Event.ConfirmWindowSeconds,
+		RecoveryWindowSeconds:           cfg.Event.RecoveryWindowSeconds,
+		CooldownSeconds:                 cfg.Event.CooldownSeconds,
+		RequireRapidDrop:                cfg.Event.RequireRapidDrop,
+		RequireLowerBody:                cfg.Event.RequireLowerBody,
+		HorizontalAngleThresholdDegrees: cfg.Event.HorizontalAngleThresholdDegrees,
+		ConfigVersion:                   cfg.RuntimeConfigVersion,
 		SessionID:                       time.Now().UTC().Format("20060102-150405"),
 	})
 	if err != nil {
@@ -108,13 +115,13 @@ func (controller *controller) run(ctx context.Context, cancel func(), runID uint
 		return
 	}
 	stream := source.Start(ctx, source.Config{
-		SourceURL: controller.config.Source.URL, FFmpegPath: controller.config.Tools.FFmpegPath,
-		FFprobePath: controller.config.Tools.FFprobePath, Transport: controller.config.Source.Transport,
-		Timeout: controller.config.Source.Timeout, LowLatency: controller.config.Source.LowLatency,
+		SourceURL: cfg.Source.URL, FFmpegPath: cfg.Tools.FFmpegPath,
+		FFprobePath: cfg.Tools.FFprobePath, Transport: cfg.Source.Transport,
+		Timeout: cfg.Source.Timeout, LowLatency: cfg.Source.LowLatency,
 	}, source.Dependencies{})
 	monitored, err := monitor.New(
-		stream, runtime, engine, controller.config.Model.ConfidenceThreshold,
-		alert.NewDispatcher(controller.config.Artifacts.EventDirectory, controller.config.Source.ID), time.Now,
+		stream, runtime, engine, cfg.Model.ConfidenceThreshold,
+		alert.NewDispatcher(cfg.Artifacts.EventDirectory, cfg.Source.ID), time.Now,
 	)
 	if err != nil {
 		log.Printf("启动监控管线失败：%v", err)
@@ -172,7 +179,7 @@ func sha256File(path string) (string, error) {
 	return fmt.Sprintf("%x", digest.Sum(nil)), nil
 }

-func settingsFor(cfg config.Config) ui.Settings {
+func settingsFor(cfg config.Config, configPath string) ui.Settings {
 	return ui.Settings{
 		SourceEnvironment: cfg.Source.RTSPURLEnv,
 		ModelSHA256:       cfg.Model.SHA256,
@@ -180,5 +187,50 @@ func settingsFor(cfg config.Config) ui.Settings {
 		EventSummary: fmt.Sprintf("确认 %.1f 秒；水平角 %.0f°；快速下移=%t；下肢=%t",
 			cfg.Event.ConfirmWindowSeconds, cfg.Event.HorizontalAngleThresholdDegrees,
 			cfg.Event.RequireRapidDrop, cfg.Event.RequireLowerBody),
+		ConfigPath: configPath,
+		Camera:     cameraFieldsFrom(configPath),
+		Params: ui.ParamFields{
+			KeypointConfidence:     float64(cfg.Event.KeypointConfidenceThreshold),
+			ConfirmWindowSeconds:   cfg.Event.ConfirmWindowSeconds,
+			HorizontalAngleDegrees: float64(cfg.Event.HorizontalAngleThresholdDegrees),
+			ModelConfidence:        float64(cfg.Model.ConfidenceThreshold),
+			RequireRapidDrop:       cfg.Event.RequireRapidDrop,
+			RequireLowerBody:       cfg.Event.RequireLowerBody,
+		},
+	}
+}
+
+// cameraFieldsFrom pre-fills the settings form from the untracked local config's
+// source block. It reads credentials only to display them in the (masked) form;
+// they are never logged.
+func cameraFieldsFrom(configPath string) ui.CameraFields {
+	data, err := os.ReadFile(configPath)
+	if err != nil {
+		return ui.CameraFields{}
+	}
+	var document struct {
+		Source struct {
+			ID             string  `json:"id"`
+			Host           string  `json:"host"`
+			Port           int     `json:"port"`
+			Channel        string  `json:"channel"`
+			Username       string  `json:"username"`
+			Password       string  `json:"password"`
+			Transport      string  `json:"transport"`
+			TimeoutSeconds float64 `json:"timeout_seconds"`
+			LowLatency     *bool   `json:"low_latency"`
+		} `json:"source"`
+	}
+	if err := json.Unmarshal(data, &document); err != nil {
+		return ui.CameraFields{}
+	}
+	lowLatency := true
+	if document.Source.LowLatency != nil {
+		lowLatency = *document.Source.LowLatency
+	}
+	return ui.CameraFields{
+		ID: document.Source.ID, Host: document.Source.Host, Port: document.Source.Port,
+		Channel: document.Source.Channel, Username: document.Source.Username, Password: document.Source.Password,
+		Transport: document.Source.Transport, TimeoutSeconds: document.Source.TimeoutSeconds, LowLatency: lowLatency,
 	}
 }
@@ -6,6 +6,7 @@ import (
 	"image/color"
 	"log"
 	"os"
+	"strconv"
 	"strings"
 	"sync"
 	"time"
@@ -23,6 +24,7 @@ import (
 	"gioui.org/widget/material"

 	"silverpose/v2/internal/alert"
+	"silverpose/v2/internal/config"
 	"silverpose/v2/internal/fall"
 	"silverpose/v2/internal/monitor"
 )
@@ -41,6 +43,7 @@ var (
 	colorSubtle  = color.NRGBA{R: 0x52, G: 0x65, B: 0x7C, A: 0xFF}
 	colorAccent  = color.NRGBA{R: 0x25, G: 0x63, B: 0xEB, A: 0xFF}
 	colorAlert   = color.NRGBA{R: 0xC6, G: 0x28, B: 0x28, A: 0xFF}
+	colorStroke  = color.NRGBA{R: 0xC8, G: 0xD4, B: 0xE3, A: 0xFF}
 	colorScrim   = color.NRGBA{A: 0xB0}
 )

@@ -49,6 +52,33 @@ type Settings struct {
 	ModelSHA256       string
 	RuntimeSummary    string
 	EventSummary      string
+	ConfigPath        string
+	Camera            CameraFields
+	Params            ParamFields
+}
+
+// CameraFields pre-fill the editable camera connection form. Credentials live
+// only in the untracked local config; the form saves them back there.
+type CameraFields struct {
+	ID             string
+	Host           string
+	Port           int
+	Channel        string
+	Username       string
+	Password       string
+	Transport      string
+	TimeoutSeconds float64
+	LowLatency     bool
+}
+
+// ParamFields pre-fill the editable common detection parameters.
+type ParamFields struct {
+	KeypointConfidence     float64
+	ConfirmWindowSeconds   float64
+	HorizontalAngleDegrees float64
+	ModelConfidence        float64
+	RequireRapidDrop       bool
+	RequireLowerBody       bool
 }

 type Commands struct {
@@ -89,6 +119,7 @@ type Window struct {
 	incoming    []galleryIncoming
 	seenEvents  map[string]struct{}
 	running     bool
+	configPath  string

 	// Touched only by the event-loop goroutine.
 	imageOp       paint.ImageOp
@@ -102,6 +133,32 @@ type Window struct {
 	gallery       []*galleryItem
 	viewing       *galleryItem
 	viewerClose   widget.Clickable
+
+	// Settings form (event-loop goroutine only).
+	editHost       widget.Editor
+	editPort       widget.Editor
+	editChannel    widget.Editor
+	editUsername   widget.Editor
+	editPassword   widget.Editor
+	editTransport  widget.Editor
+	editTimeout    widget.Editor
+	editKeypoint   widget.Editor
+	editConfirm    widget.Editor
+	editAngle      widget.Editor
+	editModelConf  widget.Editor
+	lowLatency     widget.Bool
+	requireRapid   widget.Bool
+	requireLower   widget.Bool
+	saveCamera     widget.Clickable
+	saveParams     widget.Clickable
+	settingsStatus string
+	settingsList   widget.List
+	cameraID       string
+}
+
+func setEditor(editor *widget.Editor, value string) {
+	editor.SingleLine = true
+	editor.SetText(value)
 }

 func NewWindow(settings Settings, commands Commands) (*Window, error) {
@@ -139,9 +196,55 @@ func NewWindow(settings Settings, commands Commands) (*Window, error) {
 		tabs:       []string{"监控", "设置"},
 	}
 	window.tabButton = make([]widget.Clickable, len(window.tabs))
+
+	window.configPath = settings.ConfigPath
+	camera, params := settings.Camera, settings.Params
+	setEditor(&window.editHost, camera.Host)
+	setEditor(&window.editPort, strconv.Itoa(defaultPort(camera.Port)))
+	setEditor(&window.editChannel, defaultString(camera.Channel, "102"))
+	setEditor(&window.editUsername, camera.Username)
+	setEditor(&window.editPassword, camera.Password)
+	window.editPassword.Mask = '•'
+	setEditor(&window.editTransport, defaultString(camera.Transport, "tcp"))
+	setEditor(&window.editTimeout, formatFloat(defaultFloat(camera.TimeoutSeconds, 5)))
+	window.lowLatency.Value = camera.LowLatency
+	setEditor(&window.editKeypoint, formatFloat(defaultFloat(params.KeypointConfidence, 0.4)))
+	setEditor(&window.editConfirm, formatFloat(defaultFloat(params.ConfirmWindowSeconds, 1.8)))
+	setEditor(&window.editAngle, formatFloat(defaultFloat(params.HorizontalAngleDegrees, 45)))
+	setEditor(&window.editModelConf, formatFloat(defaultFloat(params.ModelConfidence, 0.25)))
+	window.requireRapid.Value = params.RequireRapidDrop
+	window.requireLower.Value = params.RequireLowerBody
+	window.settingsList.Axis = layout.Vertical
+	window.cameraID = defaultString(camera.ID, "ip-camera")
+
 	return window, nil
 }

+func defaultPort(port int) int {
+	if port <= 0 {
+		return 554
+	}
+	return port
+}
+
+func defaultString(value, fallback string) string {
+	if strings.TrimSpace(value) == "" {
+		return fallback
+	}
+	return value
+}
+
+func defaultFloat(value, fallback float64) float64 {
+	if value == 0 {
+		return fallback
+	}
+	return value
+}
+
+func formatFloat(value float64) string {
+	return strconv.FormatFloat(value, 'f', -1, 64)
+}
+
 func (window *Window) Run() int {
 	go func() {
 		err := window.loop()
@@ -551,16 +654,141 @@ func (window *Window) layoutDialog(gtx layout.Context, record alert.Record) layo
 }

 func (window *Window) layoutSettings(gtx layout.Context, model ViewModel) layout.Dimensions {
+	if window.saveCamera.Clicked(gtx) {
+		window.onSaveCamera()
+	}
+	if window.saveParams.Clicked(gtx) {
+		window.onSaveParams()
+	}
+	rows := []layout.Widget{
+		window.heading("摄像头连接（账号密码仅存本地配置，下次启动生效）"),
+		window.editorRow("IP / 主机", &window.editHost),
+		window.editorRow("端口", &window.editPort),
+		window.editorRow("通道(101 主 / 102 子)", &window.editChannel),
+		window.editorRow("账号", &window.editUsername),
+		window.editorRow("密码", &window.editPassword),
+		window.editorRow("传输 (tcp/udp)", &window.editTransport),
+		window.editorRow("连接超时 (秒)", &window.editTimeout),
+		window.checkRow("低延迟", &window.lowLatency),
+		window.buttonRow(&window.saveCamera, "保存摄像头"),
+		window.spacerRow(),
+		window.heading("常用检测参数（下次启动生效）"),
+		window.editorRow("关键点置信度", &window.editKeypoint),
+		window.editorRow("确认窗口 (秒, 1-3)", &window.editConfirm),
+		window.editorRow("水平角度阈值 (°)", &window.editAngle),
+		window.editorRow("模型置信度", &window.editModelConf),
+		window.checkRow("要求先快速下移", &window.requireRapid),
+		window.checkRow("要求膝踝清晰", &window.requireLower),
+		window.buttonRow(&window.saveParams, "保存参数"),
+		window.labelRow(window.settingsStatus),
+		window.spacerRow(),
+		window.heading("运行依赖（只读）"),
+		window.labelRow("模型 SHA-256：" + shortHash(window.settings.ModelSHA256)),
+		window.labelRow("运行依赖：" + window.settings.RuntimeSummary),
+	}
 	return layout.UniformInset(unit.Dp(12)).Layout(gtx, func(gtx layout.Context) layout.Dimensions {
-		return layout.Flex{Axis: layout.Vertical}.Layout(gtx,
-			layout.Rigid(material.H6(window.theme, "来源与运行依赖（只读，不显示 RTSP 地址或密码）").Layout),
-			layout.Rigid(material.Body1(window.theme, model.SettingsSummary).Layout),
-			layout.Rigid(material.Body1(window.theme, "模型 SHA-256："+shortHash(window.settings.ModelSHA256)).Layout),
-			layout.Rigid(material.Body1(window.theme, "运行依赖："+window.settings.RuntimeSummary).Layout),
-			layout.Rigid(material.Body1(window.theme, "事件参数："+window.settings.EventSummary).Layout),
-			layout.Rigid(material.Body2(window.theme, "参数在配置文件中维护；修改后请停止并重新开始监控。").Layout),
-		)
+		return material.List(window.theme, &window.settingsList).Layout(gtx, len(rows), func(gtx layout.Context, index int) layout.Dimensions {
+			return layout.UniformInset(unit.Dp(4)).Layout(gtx, rows[index])
 		})
+	})
+}
+
+func (window *Window) heading(text string) layout.Widget {
+	return func(gtx layout.Context) layout.Dimensions {
+		return material.Body1(window.theme, text).Layout(gtx)
+	}
+}
+
+func (window *Window) labelRow(text string) layout.Widget {
+	return func(gtx layout.Context) layout.Dimensions {
+		return material.Body2(window.theme, text).Layout(gtx)
+	}
+}
+
+func (window *Window) spacerRow() layout.Widget {
+	return func(gtx layout.Context) layout.Dimensions {
+		return layout.Spacer{Height: unit.Dp(8)}.Layout(gtx)
+	}
+}
+
+func (window *Window) editorRow(label string, editor *widget.Editor) layout.Widget {
+	return func(gtx layout.Context) layout.Dimensions {
+		return layout.Flex{Axis: layout.Horizontal, Alignment: layout.Middle}.Layout(gtx,
+			layout.Rigid(func(gtx layout.Context) layout.Dimensions {
+				gtx.Constraints.Min.X = gtx.Dp(150)
+				return material.Body2(window.theme, label).Layout(gtx)
+			}),
+			layout.Flexed(1, func(gtx layout.Context) layout.Dimensions {
+				border := widget.Border{Color: colorStroke, Width: unit.Dp(1), CornerRadius: unit.Dp(4)}
+				return border.Layout(gtx, func(gtx layout.Context) layout.Dimensions {
+					return layout.UniformInset(unit.Dp(6)).Layout(gtx, material.Editor(window.theme, editor, "").Layout)
+				})
+			}),
+		)
+	}
+}
+
+func (window *Window) checkRow(label string, value *widget.Bool) layout.Widget {
+	return func(gtx layout.Context) layout.Dimensions {
+		return material.CheckBox(window.theme, value, label).Layout(gtx)
+	}
+}
+
+func (window *Window) buttonRow(click *widget.Clickable, label string) layout.Widget {
+	return func(gtx layout.Context) layout.Dimensions {
+		return smallButton(gtx, window.theme, click, label)
+	}
+}
+
+func (window *Window) onSaveCamera() {
+	if window.configPath == "" {
+		window.settingsStatus = "未指定本地配置路径，无法保存"
+		return
+	}
+	port, err := strconv.Atoi(strings.TrimSpace(window.editPort.Text()))
+	if err != nil || port < 1 || port > 65535 {
+		window.settingsStatus = "端口无效"
+		return
+	}
+	timeout, err := strconv.ParseFloat(strings.TrimSpace(window.editTimeout.Text()), 64)
+	if err != nil {
+		window.settingsStatus = "连接超时无效"
+		return
+	}
+	transport := strings.ToLower(strings.TrimSpace(window.editTransport.Text()))
+	if transport != "tcp" && transport != "udp" {
+		window.settingsStatus = "传输须为 tcp 或 udp"
+		return
+	}
+	if err := config.WriteLocalCameraSource(window.configPath, window.cameraID,
+		strings.TrimSpace(window.editHost.Text()), port, strings.TrimSpace(window.editChannel.Text()),
+		strings.TrimSpace(window.editUsername.Text()), window.editPassword.Text(),
+		transport, timeout, window.lowLatency.Value); err != nil {
+		window.settingsStatus = "保存失败：" + err.Error()
+		return
+	}
+	window.settingsStatus = "摄像头已保存，将在下次开始监控时生效"
+}
+
+func (window *Window) onSaveParams() {
+	if window.configPath == "" {
+		window.settingsStatus = "未指定本地配置路径，无法保存"
+		return
+	}
+	keypoint, keypointErr := strconv.ParseFloat(strings.TrimSpace(window.editKeypoint.Text()), 64)
+	confirm, confirmErr := strconv.ParseFloat(strings.TrimSpace(window.editConfirm.Text()), 64)
+	angle, angleErr := strconv.ParseFloat(strings.TrimSpace(window.editAngle.Text()), 64)
+	modelConfidence, modelErr := strconv.ParseFloat(strings.TrimSpace(window.editModelConf.Text()), 64)
+	if keypointErr != nil || confirmErr != nil || angleErr != nil || modelErr != nil {
+		window.settingsStatus = "参数须为数字"
+		return
+	}
+	if err := config.WriteLocalEventTuning(window.configPath, keypoint, confirm, angle, modelConfidence,
+		window.requireRapid.Value, window.requireLower.Value); err != nil {
+		window.settingsStatus = "保存失败：" + err.Error()
+		return
+	}
+	window.settingsStatus = "参数已保存，将在下次开始监控时生效"
 }

 func highestState(result fall.FrameResult) fall.State {